ALMAL SANDWICH PANEL 1 Hour Fire Resistant LDR
Insulated sandwich panels with aluminum facings
U coefficient of walls and roof : 0.451 w/m²K
Composition
Al: Cladding in raw aluminum or anodized or pre-lacquered, thickness of 10/10
M : Core, in rock wool thickness 80 mm with integration of the wooden frame
Al: Cladding in raw aluminum or anodized or pre-lacquered, thickness of 10/10
Application areas
• Nuclear (fire containment)
• Digital protection for Data center
• Containment area
• Technical shelter or shelter with increased security
Fixing and resistance
• Method of fixing the panels together:single-component polyurethane adhesive or two-component adhesive
• Mechanical resistance by riveting:20 kg at tear-off by 2 points
Possible integrations
• Steel, aluminum, wood, expanded PVC structures, etc
• Passage of steel, aluminum, PVC, IRO tubes
• Reinforcements located in sheet steel, aluminum or plywood strip
Advantages of the integration of the framework
It constitutes a solid wood or solid butted wood structure.
It is directly integrated into the panel to make it monollithic and structural.
This technique allows you to benefit from:
• excellent air and water tightness
• wood protected from bad weather and insects
• very good resistance and stability to fire
• excellent air and water tightness
• a significant reduction in thermal bridges to avoid dew points
• reinforced insulation with thin walls
• integration facilitated by a smooth interior
• quick fixing directly into the interior facing
• A crane under load possible by its solidity forming a monocoque unit
• crane operation facilitated by controlling the dead weight of the assembly made up
Rankings
• PV EFECTIS reaction to fire B-s1, d0
• PV EFECTIS fire resistance 1 hour front and back
• TECHNICAL ADVICE of EFECTIS laboratory fire resistance 1 hour for assembly, floor to validate a tenic shelter or shelter in its entirety